Cleanroom Partitioning Systems

X90 Partitioning System

The Welconstruct Customer Solutions X90 bi-panel partitioning system provides great flexibility throughout construction and during maintenance. Panels are demountable allowing them to be removed, reconfigured and replaced without affecting adjacent panels. Essential maintenance work can be carried out from outside the cleanroom preventing interference with working processes.

Each steel panel is pre-bonded with a sterilin vinyl finish and has a plasterboard lining reducing installation time, construction costs and time on site. Panels can be provided with a polyester powder coating if required.

The system has extruded head and base sections allowing curved or flat covings to provide a flush interface.

The design of the central steel stud allows the void depth to be increased to 600mm. This enables the void to carry mechanical and electrical services, such as air ducts, gas and water pipework and power and data cabling.

Factory double or triple glazed window units provide a flush joint between panel and glass eliminating horizontal surfaces that trap contaminants.

The system offers a choice of steel, glass or GRP doors, which can be interlocked to maintain maximum cleanroom integrity as personnel and materials, enter and exit the cleanroom.

A wide variety of accessories including pass-throughs, step-over benches and air showers can also be provided to suit your individual requirements.

All partitioning systems are designed and built to our own exacting standards and are in compliance with CDM and industry regulations. Our cleanrooms are designed in accordance with ISO 14644-1 and Federal Standard 209E and meet "Good Manufacturing Practice" guidelines.

Key benefits:

Flush wipe-down surfaces
Varying wall thicknesses to allow services to be hidden
Allows modifications and maintenance without affecting cleanroom operation
Proven system
Cost-effective

M64 Partitioning System

The Welconstruct Customer Solutions M64 modular partitioning system provides a high grade cleanroom system at an economic price. Panels are factory-assembled in standard widths of 1200mm for quick and easy on-site assembly. The modular construction allows for modifications or relocation should the need arise.

Panels are finished with a polyester powder coating.

The system has pre-formed junction modules, minimising the number of line joints, providing a hygienic, easy to clean surface.

Factory double or triple glazed window units provide a flush joint between panel and glass eliminating horizontal surfaces that trap contaminants.

The system offers a choice of steel, glass or GRP doors, which can be interlocked to maintain maximum cleanroom integrity as personnel and materials, enter and exit the cleanroom.

A wide variety of accessories including pass-throughs, step-over benches and air showers can also be provided to suit your individual requirements.


home about us meeting YOUR needs workspace solutions supply chain solutions cleanroom solutions cleanroom classifications filtration standards cleanroom partitioning climate control sterile services automotive - OEM automotive - retail case studies contact us location map latest news site map 01384 267070	Cleanroom Partitioning Systems X90 Partitioning System The Welconstruct Customer Solutions X90 bi-panel partitioning system provides great flexibility throughout construction and during maintenance. Panels are demountable allowing them to be removed, reconfigured and replaced without affecting adjacent panels. Essential maintenance work can be carried out from outside the cleanroom preventing interference with working processes. Each steel panel is pre-bonded with a sterilin vinyl finish and has a plasterboard lining reducing installation time, construction costs and time on site. Panels can be provided with a polyester powder coating if required. The system has extruded head and base sections allowing curved or flat covings to provide a flush interface. The design of the central steel stud allows the void depth to be increased to 600mm. This enables the void to carry mechanical and electrical services, such as air ducts, gas and water pipework and power and data cabling. Factory double or triple glazed window units provide a flush joint between panel and glass eliminating horizontal surfaces that trap contaminants. The system offers a choice of steel, glass or GRP doors, which can be interlocked to maintain maximum cleanroom integrity as personnel and materials, enter and exit the cleanroom. A wide variety of accessories including pass-throughs, step-over benches and air showers can also be provided to suit your individual requirements. All partitioning systems are designed and built to our own exacting standards and are in compliance with CDM and industry regulations. Our cleanrooms are designed in accordance with ISO 14644-1 and Federal Standard 209E and meet "Good Manufacturing Practice" guidelines. Key benefits: Flush wipe-down surfaces Varying wall thicknesses to allow services to be hidden Allows modifications and maintenance without affecting cleanroom operation Proven system Cost-effective M64 Partitioning System The Welconstruct Customer Solutions M64 modular partitioning system provides a high grade cleanroom system at an economic price. Panels are factory-assembled in standard widths of 1200mm for quick and easy on-site assembly. The modular construction allows for modifications or relocation should the need arise. Panels are finished with a polyester powder coating. The system has pre-formed junction modules, minimising the number of line joints, providing a hygienic, easy to clean surface. Factory double or triple glazed window units provide a flush joint between panel and glass eliminating horizontal surfaces that trap contaminants. The system offers a choice of steel, glass or GRP doors, which can be interlocked to maintain maximum cleanroom integrity as personnel and materials, enter and exit the cleanroom. A wide variety of accessories including pass-throughs, step-over benches and air showers can also be provided to suit your individual requirements. All partitioning systems are designed and built to our own exacting standards and are in compliance with CDM and industry regulations. Our cleanrooms are designed in accordance with ISO 14644-1 and Federal Standard 209E and meet "Good Manufacturing Practice" guidelines.
Copyright 2004 Welconstruct · Content Management Website by FWD